Search

Consumabile for elemental analyzers

Consumabile for elemental analyzers

ELTRA offers a wide range of high-quality consumables for elemental analyzers. ELTRA consumables are not only suitable for our own analyzers, but also those of other manufacturers.

In case you are not sure which consumables are required for your application or cannot find what you are looking for, please contact us for a free consultation. One of our application specialists will get into touch with you shortly.

Solicita o estimare gratuita, fără caracter obligatoriu!

Vă rugăm să selectați elementele pe care doriți să le includeți adăugându-le in lista de solicitare.
După ce ați adăugat un element, lista va fi vizibilă în colțul din dreapta sus al site-ului

 

General chemicals, wools and fillings

General chemicals, wools and fillings

90200Anhydrone (magnesium perchlorate), 454 g 1)
90210Sodium hydroxide, 500 g 1)
90270Schuetze reagent, 100 g 1)
90289Copper II oxide, 100 g 1)
88400-0535Pt/Si catalyst, 15 g
90331Glass wool, 454 g
90332Glass wool, 50 g
90340Cellulose, 50 g
90341Cellulose, 50 g
90330Quartz wool, 50 g
92610Tube of high vacuum grease, 35 g
88400-0122Filling for carrier gas purification furnace (optional for CS analyzers)
90426-1001Filling for carrier gas purification furnace (optional for ONH analyzers)
91000-1005Copper, flakes, 25 g
88400-0508Steel wool, 454 g
90234Filling for halogen trap, potasium iodide
90235Filling for halogen trap, antimony
88600-0021Copper oxide wire (0.5*2 mm), 100 g (could be used alternatively to Pt/Si catalyst)
 

Accelerators for the induction furnace

90220Tungsten, premium, 2,500 g
90260Iron accelerator, premium, 908 g
88600-0013Iron accelerator, high purity, 454 g
88600-0010Eltracell tungsten-tin accelerator, 750 g
90280Tin accelerator, 908 g
90240Copper accelerator, 1392 g
 

Combustion support for the resistance furnace

90840Quartz sand, 100 g
88600-0008Combsolid, 100 g
 

General tools and accessories

23110Spatula, 1 piece, M size
23111Spatula, 1 piece, L size
23113Spoon, 1 piece, for dosing sample and accelerator in CS series
90145Tongs for ceramic crucibles and boats, 220 mm 1 piece, for CS series
88400-0213Tongs for graphite crucibles, 1 piece, for ONH series
88400-0229Tweezers (160 mm), curved, 1 piece
88400-0472Tweezers (145 mm), straight, 1 piece
88400-0475Set with 6 spatula and 1 tweezers, for multiple weighing procedures
88400-0476Micro spatula, 1 piece, XS size, for filling small capsules
 

Tools for storage, transporting and weighing

36121Quartz boat, 1 piece, 74 x 22 x 10 mm, 1 piece, for weighing pins
71010Brush, 16 mm, 1 piece, for cleaning balance from dust
88400-0477Weighing boat, 1 piece, for weighing and usage of granulates
88400-0509Metal pan, 1 piece, for storage of used crucibles, boats
88400-0517Transfer pipettes for applying liquids, 3 ml, 500 pieces
88600-0015Crucible holder, for storage of crucibles
90146Steel pot for preheated crucibles and used crucibles
90179Vacuum pipettes 150 x 3.5 mm, for sampling molten steel, 1000 pieces
 

Tools for maintenance

88400-0473Powder funnel (plastics), 1 piece, for easy filling of chemical tubes
88400-0489Rubber plug 14 x 20 x 24 mm, 1 piece, for sealing small glass tubes like 88400-0006
88400-0490Rubber plug 29 x 35 x 30 mm, 1 piece, for sealing big glass tubes like 09090
71010Brush, 16 mm, 1 piece, for cleaning balance from dust
88400-0332Threaded rod M4x150, 1 piece, for removing paper filter holder
88400-0500Telescope mirror, 1 piece, for inspection of upper electrode of ONH-p/ONH-2000
71032Composite brush, 1 piece, for cleaning upper electrode of ONH-p furnace
71035Cleaning brush / furnace brush, 1 piece, for cleaning sample inlet of ONH furnaces
71031Metal brush, 1 piece, for cleaning graphite tip and its holder
88400-0504Cylinder brush, brass, for intensive cleaning of lower furnace
88400-0501Micro brush, 1 piece, for cleaning of ONH series furnace outlet tube
 

Consumables for ELTRA CS, CHS and special analyzers

Crucibles and lids for the combustion furnace

90149Ceramic crucibles, premium, Ø 1”,
foil-wrapped, 1,000 pieces
90148Ceramic crucibles, premium, Ø 1”,
bagged, 1,000 pieces
88400-0176Ceramic filtering crucibles, 100 pieces
88400-0142Ceramic filtering crucibles, small version, 100 pieces
88600-0014Ceramic lids, 10 mm hole, 250 pieces
88600-0017Ceramic lids, 4 mm hole, 1000 pieces
26063Ceramic crucibles for TGA
26053Ceramic lid for TGA
 

Boats for the resistance furnace

90153Re-usable ceramic boats, premium, 58 x 22 x 14 mm, 500 pieces
90160Disposable porcelain boats, 86 x 13 x 10 mm, 1,000 pieces
88600-0011Re-usable ceramic boats, 95 x 13 x 10 mm, 500 pieces
88400-0502Re-usable inconel boat, 54 x 18 x 13.5 mm, 1 piece
88400-0503Re-usable inconel boat, 54 x 18 x 9 mm, 1 piece
36120Quartz boat, 75 x 16 x 7.5 mm, 1 piece
36121Quartz boat, 74 x 22 x 10 mm, 1 piece
46160Combustion boat SurfaceC-800
 

Tools

36216Combustion boat insertion stick, 1 piece (not suitable for CS-d)
36217Combustion boat removing stick, 380 mm, 1 piece (not suitable for CS-d)
36216-2001Combustion boat insertion stick, 1 piece (only for CS-d)
36218-2001Combustion boat removing stick, 1 piece (only for CS-d)
88400-0499Safety glasses, 1 piece protection when working with hot furnace
88600-0009Screen glass with edge guard, 1 piece protection when working with hot furnace
 

Consumables for ELTRA ONH analyzers

Capsules, foils and fluxes for ONH analysis

90257Nickel capsules, 3.2x7 mm, 100 pieces
90256Nickel capsules, 4.5 x 10 mm, 250 pieces
88400-0066Nickel capsules, pressed, 12.5 x 5 mm, 100 pieces
90252Tin capsules, 5 x 18 mm, 100 pieces
88400-0474Tin foil, 36x36 mm, cup form, 200 pieces
 

Baskets (required for oxygen and nitrogen determination in refractories)

90250Nickel baskets, 100 pieces, 1 g each
88600-0012Nickel baskets, high purity (low oxygen),
100 pieces, 1 g each
 

Fluxes (required for some applications)

90251Tin pellets, 454 g (for determination of hydrogen in titanium)
90800Graphite, 50 g (improves oxygen determination)
90258Nickel accelerator, 100 g (for analysis of high amount of refractories)
 

Crucibles

88400-0471Graphite crucibles, 400 pieces (recommended for autoloader operation)
90190Graphite crucibles, 400 pieces (for copper, brass and steel analysis)
90180Inner graphite crucibles, 100 pieces (requires outer graphite crucible 90185)
90185Outer graphite crucibles, 50 pieces
 

Calibration material for induction furnaces

Steel / Cast Iron

92400-3020Steel, 150 g, 0.001 – 0.01 % C Details Details
92400-3030Steel, 150 g, 0.01 – 0.05 % C Details Details
92400-3050Steel, 150 g, 0.1 – 0.2 % C Details Details
92400-3060Steel, 150 g, 0.2 – 0.5 % C Details Details
92400-3061Steel, 150 g, 0.2 – 0.5 % C Details Details
92400-3062Steel, 150 g, 0.2 – 0.5 % C Details Details
92400-3070Steel, 150 g, 0.5 – 1.0 % C Details Details
92400-3090Cast iron, 150 g, 2.0 – 3.0 % C Details Details
92400-3091Cast iron, 150 g, 2.0 – 3.0 % C Details Details
92400-3100Cast iron, 150 g, 3.0 – 5.0 % C Details Details
92400-3101Cast iron, 150 g, 3.0 – 5.0 % C Details Details
92400-3102Cast iron, 150 g, 3.0 – 5.0 % C Details Details
92400-4005Steel, 150 g, ~0.05 % S Details Details
92400-4010Steel, 150 g, ~0.1 % S Details Details
92400-4020Steel, 150 g, ~3 % S Details Details
 

Steel pins; nominal weight 1 g

92500-1001C/S pins, 454 g, ~0.2 %~C
92500-1002C/S pins, 454 g, ~0.4 %~C
92500-1003C/S pins, 454 g, ~0.8 %~C
92500-2001C/S pins, 454 g, ~0.2 % S
 

Tungsten carbide

90816-3001Tungsten carbide, 100 g, ~6.1 % C
 

Other calibration material suitable for resistance and induction furnace

90812-3001Limestone, 25 g, 0.04 % S
90812-3002Limestone, 25 g, 0.4 % S
90812-3003Limestone, 25 g, < 5 % C
90812-3004Limestone, 25 g, 5 – 10 % C
90817-3001Soil, 25 g, > 2 % C, S
90817-3002Soil, 25 g, < 1 % C, S
90817-3003Soil, 25 g, > 2 % C, S
90817-3004Soil, 25 g, < 2 % C, < 1 % S
91900-1001Ore, 30 g, ~1.4 % S
91900-1002Ore, 30 g, ~4.2 % S
91900-1003Ore, 30 g, ~3 % S
91900-2001Zinc sulfide, 50 g, 32 % S
90810Calcium carbonate, 100 g
90821Barium sulphate, 50 g
 

Other calibration material only suitable for resistance furnace

90710-3010EDTA, 50 g
90710-3030Sucrose, 50 g
90824Sulfanilic acid, 50 g
90700-1040Calcium oxalate, 50 g
 

Coal, only sulfur certified

92511-3005Coal, 50 g, <0.1 % S Details Details
92511-3010Coal, 50 g, 0.1 – 0.5 % S Details Details
92511-3020Coal, 50 g, 0.5 – 1.0 % S Details Details
92511-3030Coal, 50 g, 1.0 – 1.5 % S Details Details
92511-3040Coal, 50 g, 1.5 – 2.0 % S Details Details
92511-3050Coal, 50 g, 2.0 – 3.0 % S Details Details
92511-3060Coal, 50 g, 3.0 – 4.0 % S Details Details
92511-3070Coal, 50 g, 4.0 – 5.0 % S Details Details
92511-3080Coal, 50 g, >5.0 % S Details Details
 

Coal, premium, C/H/N/S, ash, volatile content, certified

92550-3010Coal, premium, 50 g, < 1.0 % S Details Details
92550-3020Coal, premium, 50 g, > 1 % S Details Details
92550-3040Coal, premium, 50 g, 1.0 – 3.0 % S Details Details
92550-3060Coal, premium, 50 g, > 3.0 % S Details Details
 

Coke, premium, C/H/N/S, ash, volatile content, certified

92560-3010Coke, premium, 50 g Details Details
 

Pet coke, premium, C/H/N/S, ash, volatile content certified

92570-3020Pet coke, 50 g, > 1 % S Details Details
92570-3040Coal, premium, 50 g, > 1 % S Details Details
 

Liquid calibration material

92530Oil, 100 ml
90860Glycerine, 100 g
 

Calibration materials

Calibration materials may show slight variations depending on the current lot.
To see the current certification please visit www.ELTRA.com.

Oxygen and nitrogen in steel, pins

91100-1001Steel, 100 pins, 1 g each, 25-40 ppm N Details Details
91100-1002Steel, 100 pins, 1 g each, 30-70 ppm N Details Details
91100-1003Steel, 100 pins, 1 g each, 150-250 ppm N Details Details
91100-1005Steel, 100 pins, 1 g each, 300-600 ppm N Details Details
91100-1007Steel, 100 pins, 1 g each, 70-130 ppm N Details Details
91100-1010Steel, 100 pins, 1 g each, >1000 ppm N Details Details
91100-1011Steel, 100 pins, 1 g each, 600-1000 ppm N Details Details
 

Hydrogen in steel, pins

91400-1001Steel, 100 pins, 1 g each, 0.5-1 ppm H Details Details
91400-1002Steel, 100 pins, 1 g each, 1.5-4 ppm H Details Details
 

Hydrogen in steel, balls

91110Steel, 100 balls, gold plated, 1 g each, >1.9 ppm H Details Details
 

Oxygen and sulfur in copper, pins

91000-1003Copper, 100 pins, 1 g each, ~200 ppm O; 10 – 20 ppm S Details Details
91000-1004Copper, 100 pins, 1 g each, ~10 ppm O; 10 – 20 ppm S Details Details
 

Oxygen in copper, pins

 

Oxygen, nitrogen and hydrogen in titanium, pins

91205-1001Titanium, 100 pins, 0.1 g each, 10-35 ppm H Details Details
91205-1002Titanium, 100 pins, 0.1 g each, 20-70 ppm H Details Details
91205-1003Titanium, 100 pins, 0.1 g each, 30-90 ppm H Details Details
91205-1004Titanium, 100 pins, 0.1 g each, 60-120 ppm H Details Details
91205-1005Titanium, 100 pins, 0.1 g each, 150-250 ppm H Details Details
91205-1006Titanium, 100 pins, 0.1 g each, 120-150 ppm H Details Details
 

Hydrogen and carbon in titanium, pins (250 mg)

91305-1001Titanium, 100 pins, 0.25 g each, < 50 ppm H Details Details
91305-1002Titanium, 100 pins, 0.25 g each, 50 – 100 ppm H Details Details
91305-1003Titanium, 100 pins, 0.25 g each, > 100 ppm H Details Details
 

Iron powder

91500-1001Iron powder, ~1 % O2

1), Hazardous material